|
prEN 12867-1997
|
天然石料开采和加工机械的设备 链式和带式立刨床安全要求
|
Machines and plants for mining and tooling of natural stone - Safety requirements for chain and belt slotting machines
|
|
EN 772-20-2000
|
砌块的试验方法 第20部分：聚合混凝土、人造石料和天然石料砌块表面平面度的测定
|
Methods of test for masonry units - Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units
|
|
EN 772-4-1998
|
砌块的试验方法 第4部分：测定天然石料的真实密度和堆积密度（松装密度）以及总孔隙率和开放孔隙率
|
Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
|
|
EN 772-11-2000
|
砌块的试验方法 第11部分：由于粘土砌块表面张力作用和初始吸水率引起的聚合混凝土、人造石料和天然石料砌
|
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
|
|
EN 12418-2000
|
工作现场用砌石建筑和石料切割机 安全性
|
Masonry and stone cutting-off machines for job site - Safety
|
|
prEN 12866-1997
|
天然石料开采和加工机械和设备 金刚石线锯安全要求
|
Machines and plants for mining and tooling of natural stone - Safety requirements for diamond wire saws
|
|
EN 13373-2003
|
天然石料试验方法 设备几何特性的确定
|
Natural stone test methods - Determination of geometric characteristics on units
|
|
EN 13919-2002
|
天然石料的试验方法 潮湿环境下抗SO2作用老化的测定
|
Natural stone test methods - Determination of resistance to ageing by SO<(Index)2> action in the presence of humidity
|
|
prEN 771-5-2003
|
砌块规范 第5部分：人造石料砌块
|
Specification for masonry units - Part 5: Manufactured stone masonry units
|
|
prEN 1467-2003
|
天然石料 未加工料 规范
|
Natural stone - Rough blocks - Specifications
|
|
prEN 1469-2002
|
天然石料 表面处理的成品 规范
|
Natural stone products - Slabs for cladding - Requirements
|
|
prEN 1468-2003
|
天然石料 半成品(粗糙厚板) 规范
|
Natural stone - Rough slabs - Requirements
|
|
prEN 771-6-2001
|
砌块规范 第6部分：天然石料砌块
|
Specification for masonry units - Part 6: Natural stone masonry units
|
|
ANSI A108.13-2005
|
薄集瓷砖和规格石料装置的承载、粘合、防水薄膜材料的安装
|
Installation of Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile and Dimension Stone Installations
|
|
ANSI A108.17-2005
|
薄集瓷砖和规格石料裂纹绝缘薄膜的安装
|
Installation of Crack Isolation Membranes for Thin-set Tile and Dimension Stone
|
|
ANSI A118.12-2005
|
薄集瓷砖和规格石料裂纹绝缘薄膜安装的美洲国际标准规范
|
American National Standard Specifications for Crack Isolation Membranes for Thin-set Ceramic Tile and Dimension Stone Installations
|
|
ANSI A118.10-1999
|
薄瓷砖和规格石料铺设用承载的粘结防水膜
|
Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile and Dimension Stone Installations
|
|
ASTM C 99-1987
|
规格石料断裂模数的试验方法
|
Test Method for Modulus of Rupture of Dimension Stone
|
|
ASTM C 1201-1991
|
用均匀静态空气压差法测定规格石料的房屋骨袈外墙体系结构性能的标准试验方法
|
Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
|
|
ASTM C 267-1997
|
灰浆、薄浆、整块铺面石料和聚脂混凝土耐化学侵蚀性的标准试验方法
|
Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
|
|
ASTM C 413-2001
|
耐化学侵蚀的灰浆、薄浆、整块铺面石料和聚酯混凝土吸收性的标准试验方法
|
Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
|
|
ASTM C 1515-2001
|
新的或已有的外部规格石料垂直和水平表面清洁的标准指南
|
Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing
|
|
ASTM C 97-2002
|
规格石料的吸收性和堆积比重的测试
|
Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
|
|
ASTM C 1526-2003
|
蛇纹石规格石料的标准规范
|
Standard Specification for Serpentine Dimension Stone
|
|
ASTM C 629-2003
|
板条状规格石料标准规范
|
Standard Specification for Slate Dimension Stone
|
